JCS(Jel Control System), created by Jel System, is directed to those changing from
the low-pressure power contract of “load equipment contract” to a smaller capacity “main switch contract.”
Jel System’s 
Electronic breaker ® will reduce the basic charge of electricity charges.
※「Electronic breaker ®」 is a registered trademark of our company.
| Item | Specifications |
|---|---|
| Rated Power Pressure (Frequency) | 200V (50/60Hz) Electronic circuit operation with 200V applied to both sides |
| Rated Power Pressure (Operating Characteristics) | The next page of the tripping characteristics (Current－time) |
| Rated Breaking Current | 10KA |
| Pole Number | 3-pole |
| Withstand Voltage | 1500V 1min (Line – ground, between the casing) |
| Insulation Resistance | 200MΩ or more (500VDC) (Line – ground, between the casing) |
| Electrode Terminal Screw Tightening Torque | M8 Screw(Bolt) Maximum tightening torque 1N・m(About 120kgf・cm) |
| Operating Temperature Limit | -10℃～40℃ (Dewfall) |
| Storage Temperature Limit | -20℃～60℃ (Dewfall) |
| External Power Input | DC±20V (Dedicated power supply sold separately for the power company testing purposes) |
| Electrical Appliance and Material Safety Law | (PSE Compliant products) Specified electrical appliances Circuit breaker(only 100Aor less) (reference 1,2) |
| Dimension | Electronic breaker’s body (Including safety cover) : 112W×88H×305D |
| Power Consumption (Only the body) | Max 5VA (200V,25mA) |
| Weight | About 2.5kg Electronic breaker’s Body (Including safety cover terminal screws) |
| Main Material | Case：ABS Resin (Flame redundancy) Polycarbonate (Flame redundancy) The control board：Glass epoxy1.6t (Flame redundancy) |
| RoHS | ◯ |
