Energy saving lighting series

Our fluorescent light rationalization LINE of products achieving energy-saving while leaving the current fluorescent light as it is.

Our enhanced efficiency lighting equipment uses reflector with 99% light reflectance. It increases light illuminance and reduces power consumption by superior diffusibility of the light reflector. The “hybrid stabilizer” is the stabilizer which largely reduced the electrode burden of the fluorescent lamp. By using this hybrid stabilizer, you can maintain early brightness for a long time without breaking electrode part of the fluorescent lamp.

By combining these two methods, it results in significantly reduced costs and maintain the appropriate brightness for long periods of time.

Feature

<LINE>
Tokyo Metropolitan Government Bureau of Environment for SMEs introduced recommended equipment “Energy Saving Promoting Tax System Target Devices”

• More than 40% electricity costs cut down
• Brightness of two lamps with only one lamp
• CO2 significantly reduced
• Recommended for office, factory, shop and warehouse.

<Hybrid Ballast>

• Maintains the 95% of initial illuminance in 500,000 times of ON / OFF testing and 30,000 hours or more in aging test
• Power reduction of about 50% comparing to magnetic, dotetsu ballast products and of about 30% comparing to the inverter type
• Reduced impact of the summer cooler setting temperature thanks to lower heating

※The results of our experiments using a commercially available fluorescent lamp (Hf type)

Specifications

<LINE>

Products Name	Image	Pull Switch Option Available	Output Division	Power-supply voltage	Frequency	Power consumption	Suitable Lamp
Straight Type
JHD8150		Possible	Higher Power Type	100-242V	50/60Hz	50W	FHF32 x 1 lamp
JHD8270		Possible	Rated Output Type	100-242V	50/60Hz	70W	FHF32 x 2 lamps
JHD8299		–	Higher Power Type	100-242V	50/60Hz	100W	FHF32 x 2 lamps
JDH8190		Possible	Higher Power Type	200V	50/60Hz	99W	FHF86 x 1 lamp
JDH8190-FV		Possible	Higher Power Type	100-242V	50/60Hz	108W	FHF86 x 1 lamp
Implantable Type
JHI8150		Possible	Higher Power Type	100-242V	50/60Hz	50W	FHF32 x 1 lamp
JHI8270		Possible	Rated Output Type	100-242V	50/60Hz	70W	FHF32 x 2 lamps
JHI8299		–	Higher Power Type	100-242V	50/60Hz	100W	FHF32 x 2 lamps
Hanging Type
JHP8150		Possible	Higher Power Type	100-242V	50/60Hz	50W	FHF32 x 1 lamp
JHP8270		Possible	Rated Output Type	100-242V	50/60Hz	70W	FHF32 x 2 lamps

Steps to Installation

Energy-saving solutions

Electronic breaker (JCS)

Energy saving lighting series

Remote Monitoring System
(EneSEE)

Air Conditioner Control System
(Jel-Con)

High-voltage substation

Jel security camera