Magnetoresistive element type – proximity switch

This is a proximity switch that operates by magnetic force. The simple drive method realizes low cost.
The operating distance can be set by magnetic force with this proximity switch, and custom-made products are also available,
such as changing the length of the wires, or the terminal processing, etc.

Feature

  • Adopted a magneto resistive element
  • Magnet drive type
  • Can be semi-permanently by semiconductor output
  • Built-in surge absorbing circuit and power supply polarity protection circuit
  • Operating distance can be set by a magnet

Specifications

SpecificationsJME-001NON-F2JME-101NON-F2
ConfigurationCylindrical typeSquare type
Power supply voltageDC10V~30V ※1
NO (Normally open) typeNON-F2
NC (Normally closed) typeNCN-T2
Standard operating distance10mm
Set distance0~6mm
Hysteresis0.5mm and below
Standard detection objectJM-102JM-104
Operating distanceVariabilityWithin ±2mm of standard operating distance
Temperature characteristicsWithin ±20% under the Temperature of 20℃
Temp. range : -20~70℃
Voltage characteristicsWithin ±20% under the voltage of 20V
Voltage. range : DC10V~30V
Ingress protectionIP66IP67
Material of caseCase : heat-resistant ABS
Screw : SPCC
Case : heat-resistant ABS
※1 DC5V~10V type is also available
Common Specifications
Output methodNPN open collector
Output power supply voltageDC5~10VDC10~30V
Current consumption7mA(12V)
14mA(24V)
7mA(12V)
14mA(24V)
Maximum output current100mA(5V)
200mA(10V)
100mA(12V)
200mA(24V)
Residual voltage0.6V or less
Operation configurationNO When detection object approaches Load ON
NC When detection object approaches Load OFF
Display methodNO When detection object approaches LED lighting
NC When detection object approaches LED turning off
Maximum switching frequency1000Hz
Insulation resistance100MΩ or more
Withstand voltageAC1500Vrms / For 1 minute
Operating temperature range-20~70℃
RoHS compliantO

Control related products

TOP